Engineering Plastic Supplier Penang, High Performance Plastic Supplier Penang

Features:

• PSU are rigid, high-strength and transparent. They are also characterized by high strength and stiffness, retaining these properties between −100 °C and 150 °C. They have a high dimensional stability, the size change when exposed to boiling water or 150 °C air or steam generally falls below 0.1%.

Features:

• PPSU is an amorphous high performance thermoplastic offering better impact resistance and chemical resistance than polysulfone and polyetherimide. PPSU offers superior hydrolysis resistance when compared to other amorphous thermoplastics as measured by steam autoclaving cycles to failure.

Features:

• Ultra High Molecular Weight Polyethylene (UHMW-PE) is a subset of the thermoplastic polyethylene, it is odorless, tasteless, and nontoxic. It embodies all the characteristics of HDPE with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents.

Features:

• POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features: PET (Polyethylene terephthalate), is the most common thermoplastic polymer resin of the polyester family and is used in fibres for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fibre for engineering resins.

Features:

• Polybutylene terephthalate (PBT) is a synthetic semi-crystalline engineered thermoplastic with similar properties and composition to polyethylene terephthalate (PET). It is part of the polyester group of resins and shares similar characteristics to other thermoplastic polyesters.

Features:

• Polyethylene Terephthalate Glycol is a water clear material and designed to be very ‘easy to use’ in a range of applications. It’s a thermoplastic polymer created through the copolymerisation of PET and ethylene glycol. Its properties include being transparent with a high gloss surface.

Main Features:

• Polyphenylene oxide (PPO), due to its inherent chemical composition, exhibits unusually low moisture absorption, providing excellent insulating properties and dimensional stability over a wide range of humidity and temperature.

Main Features:

• PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Main Features:

• PMMA also known as acrylic, acrylic glass, a transparent thermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin, in inks and coatings, and has many other uses.

Main Features:

• PS, Polystyrene is a synthetic aromatic hydrocarbon polymer made from the monomer styrene. Polystyrene can be solid or foamed.
• General purpose polystyrene is clear, hard, and rather brittle.