Plastic Engineering Supplier Penang

Features:
PVC (Polyvinylchloride) is rated self-extinguishing, has an exceptional chemical resistance and is easy to machine. PVC shows high mechanical strength, tensile strength and can be used in applications ranging in temperatures from +5 °F to +140 °F.

Features:
G-10 (Glass Cloth / Epoxy Resin) are glass-epoxy laminates that are specified for their extremely high strength and high dimensional stability over temperature. G-10 is used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation.

Features:

• Duratron CU60 PBI is the highest performance engineering thermoplastic available today. It offers the highest heat resistance and mechanical property retention over 400°F of any unfilled plastic.

Features:

• Duratron T4203 (Torlon 4203) PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded grade is very popular for precision parts in high-tech equipment. In addition, its good electrical insulating ability provides numerous possibilities in the field of electrical components.

Main Features:

• Duratron D7000 PI is an exceptional value for applications where thermal requirements exclude Duratron PAI and do not require the extraordinary thermal resistance of Duratron PBI.

Features:

• ECTFE exhibits an extraordinary impact strength at temperatures ranging from -104 °F to +302 °F. A great part of the product properties attributes to the very smooth surface and differentiates it from other fluoropolymers.

Features:

• PCTFE, combines physical and mechanical properties, non flammability, chemical resistance, near-zero moisture absorption and excellent electrical properties not found in any other thermoplastic fluoropolymer that also performs well in a temperature range of -400° F to 400° F.

Features:

• Polytetrafluoroethylene (PTFE), or known as Teflon is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. PTFE belongs to the group of highly chemically resistant fluorothermoplastics.

Features:

• PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. Polyetheretherketone can be used at very high temperatures (+480 °F) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength.

Features:

• Polyvinylidene fluoride (PVDF), is a fluorinated thermoplastic resin which has outstanding resistance to most mineral and organic acids, aliphatic and aromatic hydrocarbons, alcohols, halogenated solvents, and oxidizing environments. It combines high density, high strength, and with very low moisture absorption.

Features:

• PPS (Polyphenylene Sulfide) is an organic polymer consisting of aromatic rings linked by sulfides. Synthetic fiber and textiles derived from this polymer resist chemical and thermal attack. PPSU is an engineering plastic, commonly used today as a high-performance thermoplastic.

Features:

• PFA is a tough, flexible fluoropolymer that is used for flexible tubing and fluid processing equipment when chemical resistance, high purity, and low stiffness are required. PFA has outstanding electrical properties including high dielectric strength, a low dissipation factor, and a low dielectric constant.

Features:

• Duratron 1000 / Ultem 1000 is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. Relative to PEEK, PEI is cheaper, but is lower in impact strength and usable temperature.

Features:

• PSU are rigid, high-strength and transparent. They are also characterized by high strength and stiffness, retaining these properties between −100 °C and 150 °C. They have a high dimensional stability, the size change when exposed to boiling water or 150 °C air or steam generally falls below 0.1%.

Features:

• PPSU is an amorphous high performance thermoplastic offering better impact resistance and chemical resistance than polysulfone and polyetherimide. PPSU offers superior hydrolysis resistance when compared to other amorphous thermoplastics as measured by steam autoclaving cycles to failure.

Features:

• Ultra High Molecular Weight Polyethylene (UHMW-PE) is a subset of the thermoplastic polyethylene, it is odorless, tasteless, and nontoxic. It embodies all the characteristics of HDPE with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents.

Features:

• POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features: PET (Polyethylene terephthalate), is the most common thermoplastic polymer resin of the polyester family and is used in fibres for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fibre for engineering resins.

Features:

• Polybutylene terephthalate (PBT) is a synthetic semi-crystalline engineered thermoplastic with similar properties and composition to polyethylene terephthalate (PET). It is part of the polyester group of resins and shares similar characteristics to other thermoplastic polyesters.

Features:

• Polyethylene Terephthalate Glycol is a water clear material and designed to be very ‘easy to use’ in a range of applications. It’s a thermoplastic polymer created through the copolymerisation of PET and ethylene glycol. Its properties include being transparent with a high gloss surface.

Main Features:

• Polyphenylene oxide (PPO), due to its inherent chemical composition, exhibits unusually low moisture absorption, providing excellent insulating properties and dimensional stability over a wide range of humidity and temperature.

Main Features:

• PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Main Features:

• HDPE, High Density Polyethylene is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes.