Plastic Engineering Supplier Penang, High Performance Plastic Supplier Penang

Features:
PVC (Polyvinylchloride) is rated self-extinguishing, has an exceptional chemical resistance and is easy to machine. PVC shows high mechanical strength, tensile strength and can be used in applications ranging in temperatures from +5 °F to +140 °F.

Features:
Duratron T5030 PAI is 30% glass-reinforced. It offers high rigidity, retention of stiffness, a low expansion rate and improved load carrying capabilities. This grade is well suited for applications in the electrical/electronic, business equipment, aircraft and aerospace industries.

Features:
Semitron® ESd 520HR PAI was the industry first to offer a combination of electrostatic dissipation (ESd), high strength and heat resistance. The key features of 520HR are its unique ability to resist dielectric breakdown at high voltages (>100V).

Features:
This 30% glass fiber reinforced grade offers higher stiffness, strength and creep resistance than the other Duratron® PAI grades. It is well suited for structural applications supporting static loads for long periods of time at high temperatures.

Features:
This Duratron PAI is primarily used for wear and friction parts. It offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. Duratron T4301's flexural modulus of 1,000,000 psi, is higher than most other advanced engineering plastics.

Features:
Semitron® ESd 420 is a static dissipative Polyetherimide. This material has the same general properties as PEI but with static dissipative properties throughout, resistivity in the range of 10^6 to 10^9. It is thermally stable to temperatures of 420°F (215°C) without degradation.

Features:
Ultra High Molecular Weight Polyethylene (UHMW-PE) is a subset of the thermoplastic polyethylene, it is odorless, tasteless, and nontoxic. It embodies all the characteristics of HDPE with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents.

Features:
PA (Polyamide), known as polyamide or Nylon, a semi crystalline thermoplastic with low density and high thermal stability. There are often numbers associated with nylon plastics types such as 6, 66, 12 and 46. These numbers relate to the molecular structure of the nylon polymer and each structure type will have different properties.

Features:
POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features:
POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features:
PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Features:
PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Features:
ABS is a thermoplastic copolymerisate made from acrylonitrile, butadiene and styrene monomers. Using different combinations of these monomers, wide-ranging different ABS types can be manufactured offering a wide spectrum of different properties by means of branching or copolymerization.

Features:
HDPE, High Density Polyethylene is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes.

Features:
HDPE, High Density Polyethylene is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes.

Features:
HDPE, High Density Polyethylene is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes.

Features:
PP, Polypropylene is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles.

Features:
PP, Polypropylene is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles.

Features:
PP, Polypropylene is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles.

PMMA also known as acrylic, acrylic glass, a transparent thermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin, in inks and coatings, and has many other uses.

Features:
PMMA also known as acrylic, acrylic glass, a transparent thermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin, in inks and coatings, and has many other uses.

Features:
PMMA also known as acrylic, acrylic glass, a transparent thermoplastic often used in sheet form as a lightweight or shatter-resistant alternative to glass. The same material can be used as a casting resin, in inks and coatings, and has many other uses.

Features:
PVC (Polyvinylchloride) is rated self-extinguishing, has an exceptional chemical resistance and is easy to machine. PVC shows high mechanical strength, tensile strength and can be used in applications ranging in temperatures from +5 °F to +140 °F.