Plastic Engineering Supplier Penang, High Performance Plastic Supplier Penang, Engineering Plastic Supplier Penang

Features:
Duratron T5030 PAI is 30% glass-reinforced. It offers high rigidity, retention of stiffness, a low expansion rate and improved load carrying capabilities. This grade is well suited for applications in the electrical/electronic, business equipment, aircraft and aerospace industries.

Features:
Semitron® ESd 520HR PAI was the industry first to offer a combination of electrostatic dissipation (ESd), high strength and heat resistance. The key features of 520HR are its unique ability to resist dielectric breakdown at high voltages (>100V).

Features:
This 30% glass fiber reinforced grade offers higher stiffness, strength and creep resistance than the other Duratron® PAI grades. It is well suited for structural applications supporting static loads for long periods of time at high temperatures.

Features:
This Duratron PAI is primarily used for wear and friction parts. It offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. Duratron T4301's flexural modulus of 1,000,000 psi, is higher than most other advanced engineering plastics.

Features:
Semitron® ESd 420 is a static dissipative Polyetherimide. This material has the same general properties as PEI but with static dissipative properties throughout, resistivity in the range of 10^6 to 10^9. It is thermally stable to temperatures of 420°F (215°C) without degradation.

Features:
Ultra High Molecular Weight Polyethylene (UHMW-PE) is a subset of the thermoplastic polyethylene, it is odorless, tasteless, and nontoxic. It embodies all the characteristics of HDPE with the added traits of being resistant to concentrated acids and alkalis, as well as numerous organic solvents.

Features:
PA (Polyamide), known as polyamide or Nylon, a semi crystalline thermoplastic with low density and high thermal stability. There are often numbers associated with nylon plastics types such as 6, 66, 12 and 46. These numbers relate to the molecular structure of the nylon polymer and each structure type will have different properties.

Features:
POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features:
POM also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability.

Features:
PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Features:
PC (Polycarbonate) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed.

Features:

• Duratron CU60 PBI is the highest performance engineering thermoplastic available today. It offers the highest heat resistance and mechanical property retention over 400°F of any unfilled plastic.

Features:

• Duratron T4203 (Torlon 4203) PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded grade is very popular for precision parts in high-tech equipment. In addition, its good electrical insulating ability provides numerous possibilities in the field of electrical components.

Main Features:

• Duratron D7000 PI is an exceptional value for applications where thermal requirements exclude Duratron PAI and do not require the extraordinary thermal resistance of Duratron PBI.

Features:

• ECTFE exhibits an extraordinary impact strength at temperatures ranging from -104 °F to +302 °F. A great part of the product properties attributes to the very smooth surface and differentiates it from other fluoropolymers.

Features:

• PCTFE, combines physical and mechanical properties, non flammability, chemical resistance, near-zero moisture absorption and excellent electrical properties not found in any other thermoplastic fluoropolymer that also performs well in a temperature range of -400° F to 400° F.

Features:

• Polytetrafluoroethylene (PTFE), or known as Teflon is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. PTFE belongs to the group of highly chemically resistant fluorothermoplastics.

Features:

• PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. Polyetheretherketone can be used at very high temperatures (+480 °F) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength.

Features:

• Polyvinylidene fluoride (PVDF), is a fluorinated thermoplastic resin which has outstanding resistance to most mineral and organic acids, aliphatic and aromatic hydrocarbons, alcohols, halogenated solvents, and oxidizing environments. It combines high density, high strength, and with very low moisture absorption.

Features:

• PPS (Polyphenylene Sulfide) is an organic polymer consisting of aromatic rings linked by sulfides. Synthetic fiber and textiles derived from this polymer resist chemical and thermal attack. PPSU is an engineering plastic, commonly used today as a high-performance thermoplastic.

Features:

• PFA is a tough, flexible fluoropolymer that is used for flexible tubing and fluid processing equipment when chemical resistance, high purity, and low stiffness are required. PFA has outstanding electrical properties including high dielectric strength, a low dissipation factor, and a low dielectric constant.

Features:

• Duratron 1000 / Ultem 1000 is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. Relative to PEEK, PEI is cheaper, but is lower in impact strength and usable temperature.

Features:

• PSU are rigid, high-strength and transparent. They are also characterized by high strength and stiffness, retaining these properties between −100 °C and 150 °C. They have a high dimensional stability, the size change when exposed to boiling water or 150 °C air or steam generally falls below 0.1%.